access control system ppt, door access control, access control list, access control system

Installing Access Control Systems

Access Control

Access Control System

Office security is one of the top-most priorities when planning the interior scheme and other office needs. An access control system provides impeccable office security and restricts access only to authorized personnel.

Access control system installation is best done after thorough analysis by professionals. Hard-wired system installation requires more care than that needed for wireless access control system installation.

When carrying out the access control system installation, systemized way of approach is advised.

1. Planning

Before actually starting with the system installation procedure, assess your requirements and plan accordingly. Know where to place all the components and form a basic framework to be stuck to. The control panel should be accessible and within easy reach of an outlet and phone jack.

2. Control Panel

The control panel has to be screwed in place. The power cord is run inside the wall. If not possible, make sure to keep the control panel out of sight. A line must be run from the phone jack to the control panel.

3. Sensors

Sensors are to be installed on the doors and windows. Any attempt to break-in through the area monitored by an access control system will raise an alarm. Either screw the sensors in or patch them on to the surface using an adhesive tape.

4. Setting Up

After the components are in place, ensure the proper communication between the sensors and the control panel. Otherwise, the frequency of the sensors must be altered. Directions and instructions would be available in the manual for complete set up of the access control system.

With professional expertise, proper access control installation will provide the appropriate security needed for your office.